NanoSound DAC 2 (Basic / Standard / Pro)

NSOUNDDAC2

NanoSound DAC 2 (Basic / Standard / Pro) NSOUNDDAC2

THE NEXT GENERATION NANOSOUND DAC 2

The original NanoSound DAC is one of the most successful Pi Audio Products launched via Kickstarter, with 274 very satisfied backers and delivered on time. NanoSound DAC is a Raspberry Pi Add-on Board with HIFI DAC, LDO Voltage Regulator, OLED Display, Power Switch, Control Buttons and Infrared Remote.
It was rated a full 5 out of 5 rated by Official Pi Magazine and dramatically improves the audio quality of your Raspberry Pi.
NanoSound DAC2 has kept all the benefits of NanoSound DAC and made improvements in all areas.
With i2S audio interface, Raspberry Pi and NanoSound DAC 2 gives you the best bang for buck audio experience. A Headphone + Speaker Amp Add-on is also available to provide a fully integrated all-in-one audio experience.

NanoSound DAC 2 - Sound Quality Improvements

  • 2 x ultra precise crystal acting as master clock for lower jitter and better DSD performance. They provides very accurate timing for 44.1khz and 48khz respectively, resulting in less jitter and better sound quality. It also let the Raspberry Pi to do less work by not requiring it to generate clock signal, hence less heat and better playback performance for CPU intensive playback like DSD.

  • Improved and wider sound signal paths
  • Critical electronics component uses top audio grade capacitors by ELNA, WIMA, EVOX instead of much smaller and cheaper surface mount counterparts

NanoSound DAC 2 - Convenience Improvements

  • Digital knob style volume control for maximum accuracy
  • Reusable accessories such as NanoSound Amp^2
  • Choice of 1.5" OLED Colour Display to display album artwork
  • Dual power input is now autoswitching instead of using a manual toggle switch

Full Specifications

  • Texas Instruments PCM5122 - 192kHz Sampling Rate / 24bit Resolution Burr-Brown DAC for best sound quality
  • 2 x ultra precise crystals acting as master clock for lower jitter and better DSD performance
  • Improved and wider sound signal paths
  • Texas Instruments TPS7A4700 Ultra Low Noise Voltage Regulator
  • Switchable Power Option with auto-switching
    • Power from a single microUSB port or independently
  • Infrared Receiver and Remote Control
  • Raspberry Pi Power switch - Turn on and gracefully shut down Raspberry Pi System
  • 4 GPIO buttons and 1 Digital Rotary Knob for Media Control
  • Hi-Fi Audio Grade electronics components. Capacitors from EVOX RIFA, WIMA and ELNA
  • Full open source and available from github allows anyone to take control of the software
  • Choice of different displays with multi-language support.
    • Basic: No Display but upgradable
    • Standard: 1.3" OLED display
    • Pro: 1.5" OLED Colour Display

Optional Items:

Installation Instructions:

US$49.99
In stock
DAC2 Model

Basic (0)
Standard (15)
Pro (38)
Amp

Not included (0)
With Amp^2 - Headphone and Speaker Amp (save US$ 4) (24.99)
3D Printed Case

Not included (0)
3D Printed Case fitting DAC2 and Amp^2 (Save US$ 3) (26.99)
NanoSound CD

Not included (0)
With NanoSound CD Upsampling Playback / Extraction plug-in Full Version (Save US$ 10) (21.99)
USB CD/DVD Drive

Not included (0)
Sony External DVD writer (DRX-S90U) (44.99)
Pioneer External DVD writer (DVR-XU01C) (44.99)

NanoSound DAC 2 (Basic / Standard / Pro)
NanoSound DAC 2 (Basic / Standard / Pro)
NanoSound DAC 2 (Basic / Standard / Pro)
NanoSound DAC 2 (Basic / Standard / Pro)

 

Check out our AUDIO Products

 

Check out our DIY Products