NANOSOUND PLAYER

The NanoSound Player is a ready-to-play Audiophile Music Player with integrated OLED Display, control buttons and remote control. It can even drive your loudspeakers directly with the NanoSound AMP^2 add on! If you’re looking for great sound and an easy to use Audiophile Music player, this is the ultimate Volumio experience for you!

Available in both Kit and Ready-To-Run

What's more, we have developed our well received NanoSound CD upsampling & extraction plugin, which perfectly accompany NanoSound DAC & Player

You can now get your NanoSound Player from these stores:

Intoduction to NanoSound Player - PDF

NanoSound Player Brochure - PDF

Support Info

WHY NANOSOUND PLAYER

Turning on and off with a single button, or remotely with the remote control
The most convenient Volumio complete music player: you can control it from Volumio UI, or via its integrated buttons or with the Remote Control
It has a beautiful OLED display that notifies playback informations: artist, track name and Volumio IP are showed in real time!
With the NanoSound AMP^2 Add on, you don’t even need an external amplifier
Available with a nice 3d printed case, in black or white
Works great with Volumio: just select the I2S DAC NanoSound and install its companion plugin

SPECIFICATION

General

Wifi & Wired Ethernet Network
Play everything - MP3, FLAC, WAV, AAC, ALAC, DSD and many more
Spotify, Airplay, DLNA, Youtube & Free Web Radio
Play from Internal Storage, NAS and USB Flash
Control via Volumio App or Infrared Remote Control
1.3" OLED display with multi-language support
AUX and 3.5mm output

DAC

Texas Instruments PCM5122 DAC. 192kHz Sampling Rate / 24bit Resolution Burr-Brown DAC for best sound quality
Texas Instruments TPS7A4700 Ultra Low Noise Voltage Regulator

Amp

Headphone Amp

Output Power: 24mW @20Ω, 22mw @32Ω
Signal-To-Noise Ratio (SNR): 100db @20mW
Total Harmonic Distortion + Noise (THD+N): 0.01% @25mW

Speaker Amp

Output Power: 5W @2Ω, 3W @4Ω
Efficiency: 90% @8Ω , 85% @4Ω, 80% @2Ω
Signal-To-Noise Ratio (SNR): 90db
Total Harmonic Distortion + Noise (THD+N): 0.15%
Best Suited for Speaker with Power Rating: 15W – 30W

CUSTOMIZATION

NanoSound is fully customizable and programmable! we take full advantage of the Raspberry Pi’s open architecture.

The 6 buttons are simple GPIO buttons. Python source code will be provided to read button events.
The IR receiver and control is LIRC compatible. Lircd.conf will be provided to read button input.
The 1.3" OLED display is using i2c. The python display driver code is open sourced.
The onboard on/off switch uses the same design and software as our Nanomesher Hackable Raspberry Pi Power Switch. It has an attiny85 onboard and is open sourced.