Nanomesher Hackable Raspberry Pi Switch
Hackable Raspberry Pi Power switch which was successfully funded at Kickstarter in April 2017.
Rated 4 out of 5 by Official Pi Magazine, this neat little board from Nanomesher adds a programmable power switch to your Raspberry Pi A+/B+/2/3/Zero/Zero W, which can be controlled by a single button or IR remote!
Nanomesher Hackable Raspberry Pi Switch Cap
Rated 5 out of 5 by Official Pi Magazine, this is the perfect On/off & Display add-on board for your Raspberry Pi. Works with all versions of Pi with 40-pin GPIO connector. It comes with Power switch, OLED display, infrared, LED and i2c ports for weather sensors, also works as Volumio and Kodi control
Nanaomesher Raspberry Pi Power Switch & Pi Switch Cap are now available in below stores:
PI SWITCH FEATURES
- Fully assembled ready to use
- Single button or Infrared (IR) remote On / Off operation
- Gracefully turn off Pi by triggering system shutdown, wait for system to be fully halted and cuts power
- LED status indicator
- Blinks twice when switch receives power
- Turn on when turn on Pi
- Blinks when waiting for Pi’s system to shutdown
- Turn Off when Pi is off
- Also suitable for mounting on front face plate
- Onboard Attiny85 Microprocessor can be removed and reprogrammed if needed
(Raspberry Pi not included)
HACKABILITY
While it works out as a Pi Switch out of the box, you can also reprogram it using an Attiny MCU programmer. Code and Guides are downloadable. There is also a package which include both the Switch and Programmer.
Being Hackable, the firmware can be modified so that the switch can be used as an Attiny development board with these functions:
- One output to trigger relay
- One output to LED
- One analog input to detect voltage between 0-5v
- One input for push button
- One input for infrared receiver which I have the code to distinguish all the buttons in the remote included
- One output to trigger an external digital input (pull down)
PACKAGES OFFER
Nanomesher Raspberry Pi Power Switch
SKU: PISW1
- Hackable and Smart Pi Power Switch with removable Attiny85 microcontroller
- Jumper cables to Raspberry Pi
- High Quality MicroUSB cable (20cm)
- Infrared remote control
Nanomesher Raspberry Pi Power Switch & Programmer
SKU: PISWP1
- Hackable and Smart Pi Power Switch with removable Attiny85 microcontroller
- Jumper cables to Raspberry Pi
- High Quality MicroUSB cable (20cm)
- Infrared remote control
- Attiny Microcontroller Programmer Kit including Arduino Uno
- Arduino compatible Uno R3
- Connecting cables
- Mini breadboard
Attiny Microcontroller Programmer Kit including Arduino Uno & Attiny85
SKU: APROMM
All you need to program your Nanomesher Raspberry Pi Power Switch
- Attiny Microcontroller Programmer Kit including Arduino Uno
- Arduino compatible Uno R3
- Connecting cables
- Mini breadboard
Nanomesher Hackable Pi Switch Cap
SKU: PISWITCHCAP
Hackable Pi Switch Cap Features
Original Features:
- Fully assembled ready to use
- Single button or Infrared (IR) remote On / Off operation
- Gracefully turn off Pi by triggering system shutdown, wait for system to be fully halted and cuts power
- Onboard Attiny85 Microprocessor can be removed and reprogrammed if needed
- Open Source for both Attiny software and Shutdown Script , which means you can adopt other remote controls.
- Raspberry Pi is not Included
New Features for Pi Switch Cap:
- Directly plug onto the Pi. No jumper cable needed
- Infrared Remote signals of all buttons can be read from Pi. It's LIRC compatible which means you can adopt other remote controls.
- Kodi Control support!
- 1 x LED controllable via GPIO
- 3 x i2c ports
- Optional 0.96" OLED Display (Resolution 128x64)
- Optional highly precised SENSIRION SHT31 temperature/humidity and BOSCH BMP180 pressure sensors (Weather Pack)
- Choice between generic and multimedia Infrared Remote. Can also be purchased separately.