Quote from nanomesher on June 28, 2019, 1:05 am

Hi Twist,

Can you please check the settings under NanoSound plugin?

OLED Display should be "1.3inch OLED"

DAC Model should be "DAC"

Please refer to the "Configuration for your DAC" section in https://nanomesher.com/support/nanosound-support/

thanks

Nanomesher

Quote from Twist on June 28, 2019, 1:37 pm

Been there done that.

Quote from nanomesher on June 28, 2019, 7:38 pm

Ok, We suspect that it's not installed properly.

Please try one the following solution:

1)  Reinstall these libraries by running few commands:

	sudo apt-get -y install i2c-tools python-smbus python-pip python-dev python-imaging python-rpi.gpio python-lirc
	sudo pip install --upgrade setuptools
	sudo easy_install -U pip
	sudo pip install --upgrade python-mpd2 socketIO-client
	#extra for DAC2
	sudo apt-get -y install libfreetype6-dev libjpeg-dev build-essential
	sudo pip install --upgrade luma.oled

2)  Clean install volumio and follow method 1 or 2 in

https://nanomesher.com/support/nanosound-support/

thanks

Quote from Twist on July 6, 2019, 1:05 am

Reinstall by Commands did nothing.

 

Clean Install

Method 2

Power OFF

Reboot

Set to DAC1 and 1.3....display went instant on.

Power OFF

Reboot

+ Update Volumio

Power OFF + Reboot

+Reinstall all Plugins

Power OFF + Reboot

+Restore with Plugin

+add my old Background Image

Power OFF + Reboot

All works

 

 

Quote from lerodmanj on January 4, 2021, 7:12 pm

You guys are awesome! I learn a lot of things since I found this thread. Please keep it up. And if ever you are interested to play games for free just visit plants vs zombies for free and among us community